s specifications for "n" connectors _____________________________ n series connectors are medium sized, and weatherproof. the coupling me thod utilizes a screw system designed for use at frequencies up to microwave. these connectors are par ticularly useful where precision performance is necessary such as in test equipment, satellite communicati ons, matv, computer lan systems, and other high-tech electronic equipment. because of the quality manufacturing to lerances these connectors ensure ex cellent performance throughout 0-18ghz. materials connector parts material equivalent standard ? connector body and parts brass isocuzn38pb2 body part male contact pin brass qq-b-626 outer contact brass qq-b-750 socket contact beryllium copper phosphor bronze qq-c-530/mil-h-7199 cube2 crimp ferrule annealed copper qq-c-576 insulators, standard versions teflon delrin l-p403/bs4271 grade b rubber gaskets silicone rubber astm-e1418psi plating nickel (silver optional) mil-g-45204 electrical requirement performance test ? specification impedance 50 ? 75 ? ----- frequency range 0-18 ghz 0-1 ghz ----- vswr 1.30 max. mil- c-39012 rf insertion loss 0.2 db max. at 3 ghz mil- c-39012 rf leakage -90 db min. at 2-3 ghz mil- c-39012 test voltage (at sea level) 2500v rms mil-std-202 working voltage (at sea level) 1000v rms mil-std-202 insulation resistance 5000 megohm min. mil-std-202 contact resistance 3 megohm max. mil-c-39012 mechanical & environmental requirement performance test ? specification durability 500 insertions & extractions min. mil-c-39012 shock 100 g mil-std-202 vibration 20 g from 80-2000 hz mil-std-202 cable retention (cable types) 60 lbs. minimum pull test mil-c-39012 coupling nut 100 lbs. maximum mil-c-39012 temperature range teflon: -55 to +199 c delrin: -40 to +85 c ---------- moisture resistance continuous test mil-std-202 salt spray 48 hours mil-std-202 ?products are made to conform to the mil standard but are for commercial applications and not qpl _____________________________ for technical support: phone 973-347-4040 / fax 973-347-2111 back to index 18
- page 19 - s cmpliant rohs compliant request quote request drawing rohs compliant request quote request drawing o "n" connectors ____________________________ cable plugs ?n? cable plugs are available in solder/clamp, solder/crimp, and twist-on versions to satisfy the installer?s preference. standard cable sizes are facilitated with these connectors for applications from satellite tv to ethernet lan installations. part number descri p tion rg/u cable fi g . no. 110a108a solder/clamp plug 6a 88 110a108b solder/clamp plug 8, 213 88 110a108f solder/clamp plug 58 88 110a108g solder/clamp plug 59, 62 88 110a205a solder/crimp plug 6a 89 110a205b solder/crimp plug 8, 213 89 110a205f solder/crimp plug 58 89 110a205g solder/crimp plug 59, 62 89 110a404b2 twist-on plug thick-net 90 110a404b3 twist-on plug thick-net plenum 90 fig. 88 fig. 89 fig. 90 jacks two cable jacks and one panel jack style are available as standard items. other types are available as special order items. the cable jacks utilize the clamp/solder method of assembly a nd the panel jack will facilitate any cable size by soldering the center conductor to the c onnector?s solder-cup contact. fig. 91 fig. 92 part number description rg/u cable fig. no. 120a108b cable jack, solder clamp 8a, 11 91 120a108f cable jack, solder clamp 58, 58a, 58b 91 120a108g cable jack, solder clamp 59, 62 91 127a577 panel jack, solder cup any 92 v-bite ? pc edge mount
s s the v-bite ? is an industry award winning design pcb connector with all the advantages a designer could want. it edge mounts to the board which offers the lowest profile and utilizes very little pcb real estate. it lends itself to surface mount and through-hole soldering techniques. there are versions for ir and convection reflow sold ering. because the connector locks into place both above and below the pcb it disperses rota tional torque relief to the board and not the solder points. the v-bite ? design offers the lowest vswr ratings due to the straight through-put contact design. no right angles for reflection. available in 50 and 75 ohm, threaded and non-t hreaded. other options for pcb thickness available. other interfaces available. see ?f?, bnc twin, tnc and n sections. part number description fig. no. 161v504e n type edge mount jack (tfe insul for reflow) 98 161v504eft n type edge mount jack w/ flange and threads (tfe insul for reflow) 99 162v504e n type edge mount plug (tfe insul for reflow) 100 rohs compliant request quote request drawing fig. 98 fig. 99 fig. 100 adapters & terminator standard configurations of adap ters are machined brass with attractive nickel plating. all contacts are gold plated brass (males) and phosphor bronze (females). part number description fig. no. 132A505 female/female inline 97a 143a505 f/m/f ?t? adapter 93 145a505 f/f/f ?t? adapter 94 151a505 f/m right angle adapter 95 130a5011 male/male inline (tri-plate) 97b 132a5011 female/female (tri-plate) 97c tc1028 50w female 96 rohs compliant request quote request drawing fig. 95 fig. 93 fig. 97a fig. 97b fig. 97c fig. 94 fig. 96 n to 7/16 adapter kit 7/16 adapter kit adpt3pa is a 8 piece kit containing 7/16 to n, n to n and 7/16 to 7/16 adapters. made of machined brass and tri-plated bodies. gold plated contacts. kits are in zippered leather cases. request quote part number description fig. no. adpt3pa n to 7/16 adapter kit (tri- plate) 102
- page 20 - s _____________________________ for technical support: phone 973-347-4040 / fax 973-347-2111 back to index 19
|
